Columnex - Be Experimental
price quote / purchase / contact us
Call 1.347.688.4752

3830 Valley Centre Dr Ste 705-552
San Diego, CA 92130
support@columnex.com

 

Jenco 6219N benchtop pH meter


Jenco 6219N benchtop pH meter

Product description

  • Two LCD display pH, mV, direct ion concentration and temperature.
  • Convenient calibration with automatic buffer recognition of US or European pH buffer sets. Quick two points ion calibration. Calibration data is stored in memory and is ready for use on power up.
  • User selectable resolution of up to 0.001 for greatest accuracy.
  • Direct read out in ion concentration to simplify ion measurements.                        
  • RS-232 computer interface with software.
  • AC adaptor or battery power (low battery indicator).

Specification

  RANGE RESOLUTION ACCURACY
pH -2.000 to 16.000 pH 0.01pH/0.001pH ± 0.01 %±1 digit
ORP -1999.9 to 1999.9mV 1 mV/0.1mV ± 0.01 %±1 digit
lon 0.0 to 119.8conc 0.05,0.1 or 0.2conc ±2 digit
Temp -5.0 to 125.0 °C 0.1 °C ± 0.5 °C
  • pH buffer recognition: US(4.01,7.00,10.01) or NIST(4.00,6.86,9.18) factory set
  • pH Electrode Offset Recognition: ± 90mV at pH 7.00 or 6.86
  • pH Electrode slope recognition: ±30% at pH 4.00 , 4.01, 9.18 or 10.01
  • pH Temp Compensaton: Auto /manual -5.0 to 125.0 °C
  • Input impedance : >10(exp)13 ohms
  • Output / Connector : RS232 /BNC and 8 PIN
  • Power :6 x 1.5 Volt AA batteries or 115 / 230V AC adapter
  • Operating Temperature Conditions: From 0 to 50°C , at 85% RH
  • Weight/Dimensionse: 1070 grams(Icluding batteries) / 250mm x 240mm x 100mm
 
 

Copyright © 2009-2021 Columnex LLC.

   Home   |   Manufacturers   |   Modes   |   About Us   |   FAQ   |   Contact   |   Privacy & Terms